Hệ Thống Vệ Sinh Hơi & Chân Không

Features
● Used for cleaning solder paste, glue,etc.
●Completely pneumatic operating without fire risk.
●Cleaning in closed-loop which make lowest cleaning solvent consumption
●Equipped with high precision tri-filtering system
●Special design on air exhaust can reduce cleaning chemistry consumption
●Good  adaptability for compressor air(only 0.45Mpa could run ）
●Cleaning and drying process can be easily control with one-button operation.
●Stainless steel canbinet with good reliability and can resisit any hurt by acid and alkali cleaning chemistry.

Technical Data:
Stencil Size：Max 750mm(L) ×750mm(W) × 40mm(H)
Liquid Tank Capability：Max 40L
Liquid Usage Amount：35L
Operating Method：360°Whirl/Ejection for cleaning; High air pressure for drying
Clean Time Setting：2-5 Minutes
Dry Time Setting：2-5 Minutes
Compressor Air：0.45Mpa ～ 0.7Mpa
Air Consumption：400-600L/Min
Dross Filtering：Three class filter system
1 Filter:10μm(Filtering impurities and Labelling)
2 Filter：5μm (Filtering small particles and solder paste)
3 Filter：1μm  ( Filtering small particles and rosin)
Outlet Size：Φ124(W)×50mm(H)
Net Weight：220Kg
Machine Size：1000mm(L) ×640mm(W) × 1660mm(H)