Created by potrace 1.16, written by Peter Selinger 2001-2019

Máy rửa bản mạch PCBA - KED 600

KED 600 automatic cleaner for water is a compact structure, energy conservation, environmental protection, batch clean integration comprehensive high-end cleaning machine.

Brand: KED-Tech

Made in: China

Liên hệ mua hàng
Tình trạng: Còn hàng
Để lại số điện thoại, chúng tôi sẽ gọi lại ngay
Tags: KED 600
Mô tả sản phẩm
Bình luận & Đánh giá

Features KED 600:

  • Visualization of the whole process:     Cleaning room equipped with visual window, cleaning process be clear at a glance ;
  • The world‘s largest cleaning baskets:     645mm(L) ×560mm(W) × 200mm(H) 2 layer , Meet larger PCBA sizes and higher cleaning production ;
  • The most scientific nozzle design (patent ):   Increasing nozzles from left to right———Enhance the cleaning efficiency,Distribution nozzles up and down———Completely solve the blind clean area;
  • Nozzle pressure adjustable design :   Solve the small size of PCBA in the cleaning process by spray under high pressure collision, splash  problem ;
  • With standard diluent slot heating system :   Greatly promoted cleaning efficiency. Shorten cleaning time; ;
  • Touch screen interface :    According to different PCBA model set with different process parameters, Quick edit and variety of different process parameters can be stored program, including: solvent temperature, cleaning time, rinse times/time, rinse temperature, dry time, drying temperature, conductivity monitoring parameters, etc… According to different permissions, operator, can be set password management authority
  • High standards of cleanliness:  Ion pollution completely accords with the 610D IPC – Ⅰ class standard (less than 1.5 ug/cm2, and the U.S. army standard of MIL28809 Ⅰ class standard ;
  • Convenient liquid add mode :  Can manual to join, also can set according to proportion (5% ~ 25%) automatic proportioning DI water and chemical fluid ;
  • Special spray tank and auxiliary heating system:  Spray liquid tank is storage liquid in cleaning and rinsing process ,inject liquid into spray tank by dilution tank and continue to heat ,through high pressure pump to spray out, spray liquid tank is storage DI-water in rinsing process ,and also through high pressure pump to spray, can be choose heating or not.
  • Lower running cost:  Built-in filter device can achieve solvent recycle, reduce solvent dosage, The end of the cleaning by compressed air recycling pipeline and pump residual liquid, it could be save 50% liquid.
  • The cleanness of real-time monitoring system: For monitoring cleaning effect, Resistivity meter can be set and the scope is 1MΩ-15MΩ;
  • More environmental friendly  and zero-emission :built-in rinsing liquid emissions filtering system: effective filter cleaning process to produce a variety of impurities, COD, BOD, PH reached safety environmental emissions.

Technical Data KED 600:

Parameter Value
Clean Basket Size Max 645mm(L) × 560mm(W) × 100mm(H)
  2 layers
Dilution Tank Capacity Max 60L
Concentrate Tank Capacity 30L
Spray Tank Capacity 17L
Cleaning method 360° Whirl/Ejection
  Hot air for drying
Cleaning Time 5-30 Minutes (Reference)
Cleaning Liquid Isolation Time 1-3 Minutes
Rinsing Time 1-2 Minutes (Reference)
Rinsing Times 1-99 times (Set)
Drying Time 20-40 Minutes (Reference)
Cleaning Liquid Recovery Filter 1μm
  (filter tiny impurities: solder paste, flux, rosin, and pollutants)
Rinsing Liquid Discharge Filter 5μm
  (filter tiny impurities: solder paste, flux, rosin, and pollutants)
Dilution Liquid Heating Temperature Room temperature~60℃
Drying Heating Temperature Room temperature~90℃
Resistivity Meter Monitoring Range 1MΩ~15MΩ
DI Water Supply 30-60L/min
DI Water Pressure ≤0.4Mpa
DI Water Entrance Pipe Connection 3/4 inch
Dilution Liquid Heating Power 9KW
Air Supply 0.45Mpa - 0.7Mpa
Air Consumption 200-400L/Min
Power Supply AC380V 50HZ 65A
Net Weight 600Kg
Exhaust Size Φ100mm(W) × 30mm(H)
Machine Size 1200mm(L) × 1000mm(W) × 1800mm(H)
Xem thêm
Rút gọn

0 đánh giá về Máy rửa bản mạch PCBA - KED 600

5
0 đánh giá
4
0 đánh giá
3
0 đánh giá
2
0 đánh giá
1
0 đánh giá
Chọn đánh giá của bạn

1 bình luận, đánh giá về Máy rửa bản mạch PCBA - KED 600

Xin chào quý khách. Quý khách hãy để lại bình luận, chúng tôi sẽ phản hồi sớm
Trả lời.
Thông tin người gửi
Bình luận sản phẩm
Thông tin người gửi
0.15752 sec| 1236.438 kb
DMCA.com Protection Status