Veradel® 3300 PREM

Leave your phone number, we will call you back immediately

Product Description

Comments & Reviews

Veradel® 3300 Prem is a medium melt flow general purpose amorphous PESU resin for injection molding. This transparent grade offers high heat deflection temperature, excellent toughness and dimensional stability and resistance to mineral acids. Other desirable properties include thermal stability, creep resistance and inherent flame resistance. Veradel® 3300 Prem is FDA compliant and is approved for direct food contact.

Techinical data sheet

Physical Properties

Property	Typical Value	Unit	Test Method
Density / Specific Gravity	1.37	-	ASTM D792
Melt Mass-Flow Rate (MFR) (380°C/2.16 kg)	30 g/10 min	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.60 %	%	ASTM D955
Water Absorption (24 hr)	0.50 %	%	ASTM D570
Water Absorption - 30 days	1.9 %	%	ASTM D570

Mechanical Properties

Property	Typical Value	Unit	Test Method
Tensile Modulus	2690 MPa	MPa	ASTM D638
Tensile Strength	88.9 MPa	MPa	ASTM D638
Tensile Elongation (Yield)	6.5 %	%	ASTM D638
Flexural Modulus	2620 MPa	MPa	ASTM D790
Flexural Strength	125 MPa	MPa	ASTM D790

Impact Properties

Property	Typical Value	Unit	Test Method
Notched Izod Impact	53 J/m	J/m	ASTM D256

Thermal Properties

Property	Typical Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed)	200 °C	°C	ASTM D648
CLTE - Flow	5.2E-5 cm/cm/°C	cm/cm/°C	ASTM D696

Electrical Properties

Property	Typical Value	Unit	Test Method
Volume Resistivity	1.7E+15 ohms·cm	ohms·cm	ASTM D257
Dielectric Strength	15 kV/mm	kV/mm	ASTM D149
Dielectric Constant (60 Hz)	3.51	-	ASTM D150
Dielectric Constant (1 kHz)	3.50	-	ASTM D150
Dielectric Constant (1 MHz)	3.54	-	ASTM D150
Dissipation Factor (60 Hz)	1.7E-3	-	ASTM D150
Dissipation Factor (1 kHz)	2.2E-3	-	ASTM D150
Dissipation Factor (1 MHz)	5.6E-3	-	ASTM D150

Flammability Properties

Property	Typical Value	Unit	Test Method
Flame Rating (0.75 mm, ALL)	V-0	-	UL 94

Injection Properties

Property	Typical Value	Unit	Test Method
Drying Temperature	177 °C	°C	-
Drying Time	2.5 hr	hr	-
Processing (Melt) Temp	343 to 385 °C	°C	-
Mold Temperature	149 to 163 °C	°C	-
Injection Rate	Fast	-	-
Screw Compression Ratio	2.0:1.0	-	-

Product Functions

Good Color Stability
Paintability
High Gloss
Colorable
Good Surface Finish
Bromine Free
Low VOC
High ESCR (Stress Crack Resist.)
Good Dimensional Stability
Alkali Resistant
Acid Resistant
Alcohol Resistant
Mineral/Synthetic Oil Resistant
Detergent Resistant
Hydrolysis Resistant
Low Moisture Absorption
Good Impact Resistant
Low CLTE
Radiotranslucent
Transparency
Laser Weldable
Low Warpage
Good Processing Stability
Heat Sterilizable
Good Thermal Stability
High Heat Resistant

Applications of Veradel® 3300 PREM

Oil & Gas

Segments	Applications
Equipment & Parts	Equipment & Parts
Equipment & Parts	Piping & Tubing

Electronics

Segments	Applications
Electronic Devices & Equipment	Smartphone & Personal Computing
Display & Lighting Technologies	New Display Technologies