Kluberplus SK 11-299 Description
Kluberplus SK 11-299 is a lubricating wax based on wax-like hydrocarbons and a synthetic hydrocarbon oil. It protects reliably against wear, shows excellent adhesion and is extremely resistant to water, thus providing excellent corrosion protection also when in contact with water.
- Once applied to the component surface, the lubricant leaves a “quasi-dry” non-tacky lubricant film.
Kluberplus SK 11-299 Benefits for your application
- “Quasi-dry”, non-tacky lubricant film
- Wear protection
- High corrosion protection
- Good adhesion
- Excellent water resistance.
Technical of Kluberplus SK 11-299
Characteristics | Kluberplus SK 11-299 |
---|---|
Lower service temperature | -40 °C / -40 °F |
Upper service temperature | 120 °C / 248 °F |
Colour space | Yellow |
Texture | Solid |
Density at 20 °C | approx. 0.89 g/cm³ |
Flash point | > 200 °C |
Corrosion protection behaviour | >= 20 cycles |
Needle penetration of paraffins | 70-100 x 0.1 mm |
Water resistance | 0 - 60 |
Drop point | 70-80 °C |
Minimum shelf life | 36 months |
Kluberplus SK 11-299 Application
Kluberplus SK 11-299 was especially developed for the initial lubrication of steel chains. It is particularly suitable for chains exposed to dust, dirt, lint or water. This product makes it possible to lubricate chains which, due to the operating conditions, could not be lubricated in the past.
It ensures long-term and in some cases even lifetime lubrication in transport, drive and control chains subject to low loads, which operate at a chain temperature of 60 °C maximum and under moderate ambient conditions.
In the low-temperature range, higher starting torques are possible after longer periods of chain standstill. Shorter relubrication intervals may be required at temperatures above 80 °C, depending on the chain load and speed.
Kluberplus SK 11-299 Application notes
Kluberplus SK 11-299 has been especially designed for the initial lubrication of chains by hot dipping. When applied by hot dipping, we recommend an immersion bath temperature of 90 °C to 100 °C. Chains should remain in the bath until bubbling has stopped.
- We recommend preheating the com-ponents in order to reduce the period in the immersion bath. Excess wax can be blown off with hot air (80 to 90 °C) after the bath.
- Chains can be relubricated with any chain lubricant suiting the individual requirements (except for polyalkylene glycol oils).
Where to buy Kluberplus SK 11-299 ?
We, Hicotech, are an authorized distributor of genuine Kluberplus SK 11-299 and other industrial products such as lubricating oils, greases, chemicals, etc. For consultation and competitive pricing, please feel free to contact us.
In addition, we also distribute other product categories such as:
- Industrial chemicals
- Cleaning Chemicals
- Encapsulants
- SMT equipment
- Conformal coatings
- Industrial Accessories
Contact Information:
Hotline/Zalo. 094 526 1931
Website. Hicotech.com.vn
Email: Sale@hicotech.com.vn
Có 0 bình luận, đánh giá về Kluberplus SK 11-299
TVQuản trị viênQuản trị viên