Klubersynth Gh 6-220

Leave your phone number, we will call you back immediately

Mô tả sản phẩm

Bình luận & Đánh giá

Klubersynth Gh 6-220 Description

Klubersynth Gh 6-220 is a synthetic high-performance gear and high-temperature oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.

Klubersynth Gh 6-220 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to it without prior consultation with the gear manufacturer provided the general application notes are observed.

Benefits when using Klubersynth Gh 6-220

High scuffing protection
Excellent wear protection for gears and rolling bearings
Good shear stability for reliable lubricant film formation
High micropitting resistance
Optimized for the lubrication of worm gears
Excellent ageing and oxidation resistance
Wide service temperature range due to good viscosity-temperature behavior
Low foaming tendency
Energy savings due to optimized friction behavior
Good elastomer compatibility
Approvals by numerous gear OEMs

Technical data of Klubersynth Gh 6-220

Product data	Klübersynth GH 6-220
Article number	012287
Marking acc. to DIN 51502	CLP PG 32
Classification acc. to ISO 12925-1	CKC 32
Lower service temperature	-55°C / -67°F
Upper service temperature	160°C / 320°F
ISO viscosity grade, DIN ISO 3448	22
Density at 15°C	approx. 1,025 kg/m³
Kinematic viscosity at 20°C	approx. 54 mm²/s
Kinematic viscosity at 40°C	approx. 22 mm²/s
Kinematic viscosity at 100°C	approx. 5.3 mm²/s

Klubersynth Gh 6-220 Application

Klubersynth Gh 6-220 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings.
Klubersynth Gh 6-220 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures.
It can also be used for the lubrication of lifting, drive and transport chains.

Application notes

Klubersynth Gh 6-220 can be applied by means of immersion, immersion circulation or injection.
The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity.
The low-viscosity varieties are also used for oil mist lubrication.
Klubersynth Gh 6-220 is not miscible with mineral oil or synthetic hydrocarbons. Prior to switchover, lubrication points should be cleaned, or gears or enclosed lubrication systems be flushed with the Klubersynth Gh 6-220 oil to be used.
Klubersynth Gh 6-220 oil is neutral towards virtually all nonferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic loads.
If necessary, preliminary wear tests should be carried out. For use at permanent temperatures of 80 °C max. and with the higher viscosity varieties, seals made of NBR may be used.
For higher temperatures, seals made of FKM should be chosen. It should be noted that elastomers one or several manufacturers can behave differently; therefore tests should be performed.

Where to buy Klubersynth Gh 6-220 ?

Hicotech, are an authorized distributor of genuine Klubersynth Gh 6-220 and other industrial products such as lubricating oils, greases, chemicals, etc. For consultation and competitive pricing, please feel free to contact us.

In addition, we also distribute other product categories such as:

Contact Information:

Hotline/Zalo. 094 526 1931

Website. Hicotech.com.vn

Email: Sale@hicotech.com.vn

Xem thêm