HumiSeal Thinner 802

Description HumiSeal Thinner 802

At times the user of HumiSeal coatings may be required to lower the viscosity of the product as received the factory or to restore the coating’s original viscosity during processing.

This can be easily accomplished by adding to the coating appropriate amount of the HumiSeal Thinner compatible with the particular HumiSeal coating being used.

HumiSeal Thinners are blends of solvents or diluents that are carefully formulated to maintain the original optimum system balance when added to the correct coating type.

HumiSeal 800 Series Thinners are in full compliance with the RoHS Directive (Directive 2002/95/EC) and OSHA.

Technical data of HumiSeal Thinner 802

Applications of HumiSeal Thinner 802

Here are some key applications of HumiSeal Thinner 802:

Printed Circuit Board Protection

• It is used to dilute HumiSeal coating before applying it to printed circuit boards.
• This helps create a protective, waterproof, moisture-resistant, and oxidation-resistant coating that safeguards electronic components on the circuit board environmental impacts.

Integrated Circuit Protection

• Integrated circuits are crucial components in electronic devices such as mobile phones, computers, tablets, and various other products.
• The solution is used to dilute HumiSeal coating before application onto integrated circuits, providing protection against moisture, dust, high temperatures, and chemical environments.

Sensor Protection

• Electronic sensors like temperature sensors, light sensors, acceleration sensors, and atmospheric sensors need to be safeguarded for accurate operation.
• The product can be used to dilute HumiSeal coating and applied to sensors, creating a protective, waterproof coating that shields them environmental influences.

Controller Protection

• Electronic controllers within devices and systems require waterproofing and oxidation protection to ensure stable and reliable operation.
• Thinner 802 is used to dilute HumiSeal coating and applied to controllers, forming a reliable protective layer.

Note that the product is used as part of the HumiSeal coating system, and specific usage can vary depending on the type of coating and specific application requirements.

How to Use HumiSeal Thinner 802

To use HumiSeal Thinner 802, you can follow these steps:

1. Preparation

• Ensure you are working in a well-ventilated environment and have personal protective equipment such as gloves, safety glasses, and a mask to protect yourself direct contact with the solvent.

• Check that the bottle is properly sealed.

2. Dilution

• Refer to the manufacturer's instructions for the specific HumiSeal coating to determine the accurate dilution ratio between the coating and the thinner.

• Typically, the dilution ratio ranges 5-30% with HumiSeal coating.

• Use a measuring container or a similar tool to measure and dilute the solution according to the specified ratio.

3. Stirring

• After dilution, thoroughly stir the solution using a stirring tool like a hand stirrer or a mechanical stirrer to ensure complete dissolution the coating and achieve the desired viscosity.

4. Check Viscosity

• Check the viscosity of the solution after dilution to ensure it meets the requirements of the application process.

• Use a viscosity measuring device like a viscometer to measure the viscosity of the solution.

• If necessary, adjust the dilution ratio to achieve the desired viscosity.

5. Application

• After dilution and viscosity check, apply the solution onto surfaces or electronic components following the prescribed application process.

• Follow the instructions the HumiSeal coating manufacturer for precise application.

Note: Always read and adhere to the manufacturer's usage instructions. Specific requirements for dilution and usage procedures may vary depending on the specific coating and application.

Usage Precautions for HumiSeal Thinner 802

When using HumiSeal Thinner 802, please consider the following to ensure safety and effectiveness:

1. Personal Protection

• While working, make sure to wear personal protective equipment such as gloves, safety glasses, and a mask to protect your skin, eyes, and respiratory system direct contact with the solvent.

2. Use in Well-Ventilated Spaces

• Ensure you work in a well-ventilated area to reduce the risk of inhaling solvent fumes and to facilitate quick drying of the HumiSeal coating.

3. Avoid Contact with Flames and High Heat

• The product can quickly catch fire when exposed to flames or high heat sources.
• Avoid placing it near open flames, heat sources, or materials prone to combustion or explosions.

4. Avoid Skin and Eye Contact

• For skin contact, thoroughly wash with soap and water. In case of eye contact, immediately rinse with clean water and seek medical advice.

5. Proper Storage

• Store in a dry, cool place and avoid direct sunlight.
• Seal the bottle tightly after use to prevent evaporation and limit exposure to air.

6. Limit Usage in Poorly Ventilated Areas

• Avoid using the product in poorly ventilated spaces, such as enclosed rooms, to prevent an increase in solvent vapor concentration in the air.
• Additionally, customers can refer to the technical documentation for detailed information and specific notes on using this product.

Where to buy HumiSeal Thinner 802?

Currently, there are many counterfeit HumiSeal products on the market, negatively impacting the product's reputation and the manufacturer. This also poses risks to customers. To ensure your own interests, customers should choose to purchase genuine HumiSeal products reputable suppliers and distributors to ensure quality.

Hicotech, the authorized distributor of HumiSeal in Vietnam, provides genuine products while completely excluding counterfeit, imitation, or low-quality goods. HicoTech consistently enhances the skills and expertise of its staff and improves product quality to meet all customer needs.

Contact Information:

Hotline / Zalo: 0945 261 931

Email: sale@hicotech.com.vn