Kluber Summit SH 100

Leave your phone number, we will call you back immediately

Mô tả sản phẩm

Bình luận & Đánh giá

Kluber Summit SH 100 Description

Kluber Summit SH 100 oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Kluber Summit SH 100 Application

Kluber Summit SH 100 oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours.
It can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.
This oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean.
Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Kluber Summit SH 100.

Kluber Summit SH 100 product information.

Product data	Kluber Summit SH 100
Article number	050007
Colour	colourless
Appearance	clear
Density, 20 °C	approx. 0.86 g/cm³
Kinematic viscosity, 40 °C	approx. 100 mm²/s
Kinematic viscosity, 100 °C	approx. 13.1 mm²/s
Foam test, I/24 °C	50/0 ml <=
Foam test, II/93.5 °C	50/0 ml <=
Foam test, III/24 °C	50/0 ml <=
Flash point, Cleveland	>= 240 °C
Copper corrosion, 24 h/100°C	1 - 100 corrosion degree
Pour point	<= -33 °C
Minimum shelf life	approx. 36 months

Kluber Summit SH 100 Application notes

When selecting the oil viscosity for air compressors please observe the manufacturers' instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil whole circuit of compressor while still warm.
We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil. When switching mineral oil to a synthetic Klüber Summit SH oil please consider that the compressor may contain oxidation residues in the form of blackened or contaminated oil.

Where to purchase authentic Kluber Summit SH 100 ?

With our reputation, Hicotech has gained the trust of many customers. Contact us now for consultation and to receive the best price for Kluber Summit SH 100 product.

Contact information:

Hotline/Zalo. 094 526 1931

Website. Hicotech.com.vn

Email: Sale@hicotech.com.vn

Xem thêm