Kluberalfa DH 3-150 N

Kluberalfa DH 3-150 N - Your requirements - our solution

Are you looking for a lubricant that reduces squeaking noises in cars? Do you wish to use this lubricant for a wide variety of applications and with different material pairings? Is ease of application, especially in serial uses, an important criterion for your lubricant selection?

We have designed the DH 3-150 Noils based on perfluorinated polyether (PFPE) especially for these requirements. The lubricants' good wetting properties enable you to apply a thin oil film to various materials such as metal, elastomers or thermoplastics. The lubricant is therefore efficiently applied exclusively to where it is needed.

Our high-quality PFPE base oil provides outstanding ageing resistance for an extensive operating temperature range. Consequently, DH 3-150 N oils are also suitable for applications where lifetime lubrication is required. The lubricants are non-flammable and unsoluble to most common cleaning agents.

Kluberalfa DH 3-150 N,your benefits at a glance

• Optimised wetting properties enable cost-effective application of the lubricant
• Due to high resistance to ageing, for applications with lifetime lubrication requirement
• Can be combined with numerous material pairings
• Beneficial for application in the vehicle interior due to it being neutral in odour.

Technical data of Kluberalfa DH 3-150 N

Kluberalfa DH 3-150 N Application

Kluberalfa DH 3-150 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples:

• Contact surfaces with different material pairings in the dashboard: minimisation of unwanted noises
• Impact, rubbing and sliding points inside cars, even of various material pairings
• Sliding guides in the centre console, cup holder, navigation screen
• Locking mechanism of trays, ventilation flaps, etc.

General behaviour towards plastics and elastomers:

• Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber).
• Despite this, prior to a series application, the compatibility of the lubricant with the material with which it is to come contact, must be confirmed.

Kluberalfa DH 3-150 N Application notes

Prior to initial lubrication with the product series Klüberalfa DH 3 N, we recommend cleaning the friction point with white spirit 180/210 and subsequently with Klüberalfa XZ 3-1. After this, treat the friction point with clean, dry compressed air or hot air in order to remove the white spirit residue-free. For the initial lubrication the friction point must always be blank (that means free of oils, greases and perspiration) and free of soil particles. For additional application notes, please refer to the safety data sheet.

Where to buy Kluberalfa DH 3-150 N ?

Hicotech, are an authorized distributor of genuine Kluberalfa DH 3-150 N and other industrial products such as lubricating oils, greases, chemicals, etc. For consultation and competitive pricing, please feel free to contact us.

Contact Information:

Hotline/Zalo. 094 526 1931

Website. Hicotech.com.vn

Email: Sale@hicotech.com.vn