Kluberalfa DH 3-230 N
Kluberalfa DH 3-230 N Your requirements - our solution
Are you looking for a lubricant that reduces squeaking noises in cars? Do you wish to use this lubricant for a wide variety of applications and with different material pairings? Is ease of application, especially in serial uses, an important criterion for your lubricant selection?
We have designed the Kluberalfa DH 3-230 N oils based on perfluorinated polyether (PFPE) especially for these requirements. The lubricants' good wetting properties enable you to apply a thin oil film to various materials such as metal, elastomers or thermoplastics. The lubricant is therefore efficiently applied exclusively to where it is needed.
Our high-quality PFPE base oil provides outstanding ageing resistance for an extensive operating temperature range. Consequently, Kluberalfa DH 3-230 N oils are also suitable for applications where lifetime lubrication is required. The lubricants are non-flammable and unsoluble to most common cleaning agents.
Kluberalfa DH 3-230 N, your benefits at a glance
- Optimised wetting properties enable cost-effective application of the lubricant
- Due to high resistance to ageing, suitable for applications with lifetime lubrication requirement
- Can be combined with numerous material pairings
- Beneficial for application in the vehicle interior due to its neutral odour.
Technical data of Kluberalfa DH 3-230 N.
| Product Data | Klüberalfa DH 3-230 N |
|---|---|
| Article number | 090171 |
| Chemical composition, type of oil | PFPE |
| Lower service temperature | -25 °C / -13 °F |
| Upper service temperature | 230 °C / 446 °F |
| Colour space | colourless |
| Appearance | clear |
| Density, DIN 51757, 20 °C | approx. 1.91 g/cm³ |
| Kinematic viscosity, 40 °C | approx. 230 mm²/s |
| Kinematic viscosity, 100 °C | approx. 24 mm²/s |
| Viscosity index, DIN ISO 2909 | >= 120 |
| Refraction index, DIN 51423 pt. 02, at 20 °C | approx. 1.301 |
| Odour (based on VDA 270) 2 h / 80°C | <= 3 |
| Pour point, DIN ISO 3016 | <= -30 °C |
| Minimum shelf life | 60 months |
Kluberalfa DH 3-230 N - Application
Kluberalfa DH 3-230 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples:
- Contact surfaces with different material pairings in the dashboard: minimisation of unwanted noises – Impact, rubbing and sliding points inside cars, even of various material pairings
- Sliding guides in the centre console, cup holder, navigation screen
- Locking mechanism of trays, ventilation flaps, etc
Kluberalfa DH 3-230 N - Application notes
- Prior to initial lubrication with the product Kluberalfa DH 3-230 N , we recommend cleaning the friction point with white spirit 180/210 and subsequently with Klüberalfa XZ 3-1.
- After this, treat the friction point with clean, dry compressed air or hot air in order to remove the white spirit residue-free.
- For the initial lubrication the friction point must always be blank (that means free of oils, greases and perspiration) and free of soil particles. For additional application notes, please refer to the safety data sheet.
Where to buy Kluberalfa DH 3-230 N authentic:
With our reputation, Hicotech has gained the trust of many customers. Contact us now for consultation and to receive the best price for Kluberalfa DH 3-230 N product.
Contact Information:
Hotline/Zalo. 094 526 1931
Website. Hicotech.com.vn
Email: Sale@hicotech.com.vn
Có 0 bình luận, đánh giá về Kluberalfa DH 3-230 N
TVQuản trị viênQuản trị viên