Kluberoil GEM 1-100 N

Leave your phone number, we will call you back immediately

Mô tả sản phẩm

Bình luận & Đánh giá

Kluberoil GEM 1-100 N Your requirements - our solution

Kluberoil GEM 1-100 N is a high-performance gear and multipurpose oil based on selected mineral oils satisfying the growing requirements and increasing power density of modern gears.
Kluberoil GEM 1-100 N includes KlüberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components. Kluberoil GEM 1-100 N clearly exceeds CLP requirements according to DIN 51517-3.
Corresponding gears can be switched to Kluberoil GEM 1-100 N without prior consultation with the gear manufacturer provided the general application notes are observed.
It offers high scuffing load capacity of API GL4 if ISO VG 150 or higher is selected. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.
Kluberoil GEM 1-100 N offers a much longer service life than mineral oil-based standard gear oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anticorrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Kluberoil GEM 1-100 N . Leakage and oil contamination are prevented

Kluberoil GEM 1-100 N Your benefits at a glance

High scuffing protection
Excellent wear protection for gears and rolling bearings
Good shear stability for reliable lubricant film formation
High micropitting resistance
Excellent ageing and oxidation resistance
Low foaming tendency
Good elastomer compatibility
Approvals by numerous gear OEMs.

Kluberoil GEM 1-100 N product information.

Product data	Klüberoil GEM 1-100 N
Article number	030054
Marking acc. to DIN 51502	CLP 100
Classification acc. to ISO 12925-1	CKC 100
Lower service temperature	-5 °C / 23 °F
Upper service temperature	100 °C / 212 °F
Density at 15 °C [kg/m³]	approx. 880
Kinematic viscosity at 40 °C [mm²/s]	approx. 100
Kinematic viscosity at 100 °C [mm²/s]	approx. 11
Viscosity index	>= 90
ISO viscosity grade	100
Flash point	>= 200 °C
Pour point	<= -15 °C
Foam test, sequence I/24 °C	<= 100/10 ml
Foam test, sequence II/93.5 °C	<= 100/10 ml
Foam test, sequence III/24°C	<= 100/10 ml
Ageing properties, increase in viscosity	<= 6 %
FZG scuffing test, scuffing load stage	>= 14
FZG scuffing test, scuffing load stage (A/16.6/90)	>= 12
API scuffing load capacity	API GL 4
FAG FE8 rolling bearing test, wear of rolling element	<= 30 mg
FAG FE8 rolling bearing test, wear of cage	<= 200 mg
Anticorrosive properties on steel, 24 h/60 °C	no rust corrosion degree
Copper corrosion, 3 h/100 °C	1 - 100 corrosion degree
Minimum shelf life	60 months

Kluberoil GEM 1-100 N Application

Kluberoil GEM 1-100 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996.
Kluberoil GEM 1-100 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Kluberoil GEM 1-100 N Application notes

Kluberoil GEM 1-100 N can be applied by means of immersion, immersion circulation or injection. The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.
When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.
It should be noted that elastomers one or several manufacturers can behave differently; therefore tests should be performed.

Where to buy Kluberoil GEM 1-100 N ?

We, HicoTech, are proud to be an authorized distributor of Kluber Lubrication in Vietnam. With our reputation, we have gained trust numerous customers, including renowned brands such as Vinfast, Ford, Panasonic, and more. Contact us now for expert advice and to receive the best pricing offers for Kluberoil GEM 1-100 N products.

Contact Information:

Hotline/Zalo: 094 526 1931

Website: Hicotech.com.vn

Email: Sale@hicotech.com.vn

Xem thêm