MOLYKOTE PG-54 Plastislip Grease

MOLYKOTE PG-54 Plastislip is a special silicone-oil-based grease with a wide temperature range and good high-pressure and corrosion protection properties. It is designed for the longterm lubrication of metal/plastic, plastic/plastic and reinforced rubber/oil-resistant and non-oil-resistant combinations with high softener content.

Technical data

• Penetration, worked 60:  245-275 mm/10
• Four Ball Test wear scar, 1 hour @ 400 N:  2.0mm
• Water Washout @ 80°C (176°F):  1.0%
• Coefficient of Friction (steel ball; plastic substrate, 6.3 N load, 10 mm/sec rate): 0.04
• Temperature Range: -58°F to 356°F (-50° to 180°C)

Features and Benefits

• Good compatibility with plastics and rubber 
• Wide operating-temperature range (-50° to 180°C) 
• Silicone-based grease
• Low coefficient of friction 
• Good corrosion protection 
• Long-term lubrication for a variety of substrates

Applications of MOLYKOTE PG-54 Plastislip

Especially suited for the low-friction operation of most rubber or plastic parts, such as bearing bushings, gears and chains; sealing rings, sliding tracks and switches; and flexible control cables, which are typically found in Bowden cable control systems, electric motors and gearboxes, household and garden appliances, automotive brake systems, and automotive clutch systems.

How to use MOLYKOTE PG-54 Plastislip

Apply to clean, dry substrates using conventional grease application methods (e.g., brush, grease gun or automatic feed).

Handling precautions

PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.

Usable life and storage

MOLYKOTE PG-54 Plastislip has a shelf life of 60 months when kept in its original sealed container at temperatures above -18°C (0°F).

Packaging

MOLYKOTE PG-54 Plastislip is supplied in 25 kg (55 lb) opentop pails and 180 kg (396 lb) drums.

Where to buy MOLYKOTE PG-54 Plastislip?

Hicotech Vietnam Co., Ltd is the genuine distributor of Dupont in Vietnam.

MOLYKOTE PG-54 Plastislip distributed by Hicotech origin: USA 100%

See more at : Facebook Fanpage

Related products: Molykote 1000, ,MOLYKOTE 1102, MOLYKOTE 1122,...