HumiSeal 1C53 Description
- HumiSeal 1C53 is a single component, VOC-free, fast thermal curing silicone conformal coating.
- The low viscosity and long pot life of HumiSeal 1C53 make it ideal for dipping and spraying.
- That demonstrates excellent flexibility and contains an optical brightener for inspection under black light.
- It coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant and recognized under UL File Number E105698.
Technical data
Property | Value |
---|---|
Density (per ASTM D1475) | 0.99 ± 0.01 g/cm³ |
Min Solids Content (%) | 98% (by weight per Fed-Std-141, Meth. 4044) |
Viscosity (per Fed-Std-141, Meth. 4287) | 590 ± 100 centipoise |
VOC | 0 grams/litre |
Recommended Coating Thickness | 50 - 200 microns |
Recommended Curing Conditions | 10 - 15 min @ 105 - 130ºC |
Time Required to Reach Optimum Properties | 15 minutes |
Recommended Stripper | HumiSeal® Stripper 1091 |
Shelf Life at Recommended Conditions (DOM) | 12 months |
Thermal Shock (50 cycles per MIL-I-46058C) | -65°C to 200°C |
Coefficient of Thermal Expansion - TMA | 154 ppm/°C |
Glass Transition Temperature - DSC | < -65°C |
Modulus - DMA | 3.5 MPa |
Flammability (per UL 94) | V-0 |
Dielectric Withstand Voltage (per MIL-I-46058C) | >1500 volts |
Dielectric Breakdown Voltage (per ASTM D149) | 7000 volts |
Dielectric Constant | 2.4 |
Dissipation Factor (at 1MHz and 25°C ) | 0.01 |
Insulation Resistance (per MIL-I-46058C) | 5.0 x 10^14 ohms (500TΩ) |
Moisture Insulation Resistance (per MIL-I-46058C) | 1.0 x 10^10 ohms (10GΩ) |
Fungus Resistance (per ASTM G21) | Passes |
Application of HumiSeal 1C53
Conformal coatings can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue, “no clean” materials.
- Dipping
- A controlled rate of immersion and withdrawal (5-15 cm/min) will ensure even deposition of the coating and ultimately a uniform film.
- Spraying
- HumiSeal 1C53 can be sprayed using conventional spraying equipment. Spray pressure will depend on the specific type of spraying equipment used and operator technique.
- Spraying should be done in an environment with adequate ventilation so that the vapour and mist are carried away from the operator.
- Brushing
- HumiSeal 1C53 may be brushed. Uniformity of the film depends on component density and operator's technique.
- Curing
- HumiSeal 1C53 is a thermally cured conformal coating.
- The actual curing temperature of HumiSeal 1C53 is dependent upon several parameters, such as heat sink characteristics of parts being coated, the type of oven used for curing process, as well as oven loading parameters.
- The cure mechanism for thermally cured silicones like HumiSeal 1C53 may be inhibited by a variety of materials i.e.; amines, acrylates, certain ingredients from latex rubber, etc.
- It is recommended that process and material compatibility be considered when incorporating HumiSeal 1C53 into the production environment.
- Cotton gloves are recommended for operators who will be handling assemblies prior to coating with HumiSeal 1C53.
- Storage
- HumiSeal 1C53 should be stored at 27°C or below in tightly closed containers away from direct sunlight.
- Refrigerated storage of HumiSeal 1C53 will extend its shelf life. Prior to use, allow the product to equilibrate for 24 hours at room temperature.
Caution Application of HumiSeal 1C53
It should be carried out in accordance with local and National Health and Safety regulations. Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes.
Where to purchase authentic HumiSeal 1C53
As an authorized distributor, Hicotech provides genuine HumiSeal 1C53 and various other industrial products including lubricating oils, greases, chemicals, and more. We offer consultation services and competitive pricing. Please don't hesitate to contact us for further information.
In addition, we also distribute other product categories such as:
- Industrial chemicals
- Cleaning Chemicals
- Encapsulants
- SMT equipment
- Conformal coatings
- Industrial Accessories
Contact Information:
Hotline/Zalo. 094 526 1931
Website. Hicotech.com.vn
Email: Sale@hicotech.com.vn
Có 0 bình luận, đánh giá về Humiseal 1C53
TVQuản trị viênQuản trị viên