Kluberalfa DH 3-100

Leave your phone number, we will call you back immediately

Mô tả sản phẩm

Bình luận & Đánh giá

Kluberalfa DH 3-100 description.

Kluberalfa lubricants, based on perfluorinated polyether (PFPE), were developed to fulfil lifetime lubrication under demanding conditions and offer a number of characteristics that make them highly suitable for such tasks.
Kluberalfa DH 3-100 oils contain a PFPE oil mixture with excellent thermal stability and low evaporation rate.
They are available with different viscosities to cover various temperature ranges.

Kluberalfa DH 3-100 Benefits for your application.

Long component life across a wide service temperature range
Due to excellent thermal and chemical stability
Many component materials can be used
Due to the good compatibility with plastics and elastomers

Kluberalfa DH 3-100 technical data.

Product data	Klüberalfa DH 3-100
Article number	090067
NSF-H1 reg. no.	155 602
Chemical composition, type of oil	PFPE
Lower service temperature	-25 °C / -13 °F
Upper service temperature	180 °C / 356 °F
Density, DIN 51757, 20 °C	approx. 1.89 g/cm³
Refraction index, DIN 51423 pt. 02, at 20 °C	approx. 1.28
Kinematic viscosity, 40 °C	approx. 100 mm²/s
Kinematic viscosity, 100 °C	approx. 12 mm²/s
Viscosity index, DIN ISO 2909	approx. 114
Pour point, DIN ISO 3016	<= -40 °C
Minimum shelf life .	60 months

Kluberalfa DH 3-100 Application.

Sintered metal components.

Kluberalfa DH 3-100 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where long term lubrication is required.
Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary.

Plastic components.

Kluberalfa DH 3-100 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins.
They are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application

Kluberalfa DH 3-100 Application notes.

Sintered metal components are impregnated by immersion in the Kluberalfa DH 3-100.The oil bath can be heated up to a maximum of 80 °C, during which the immersion tank is subjected to a low vacuum of 0.1 to 0.001 bar, accelerating penetration.
The sintered-metal component is completely filled with oil when no more air bubbles are expelled to the oil surface.

Where to buy Kluberalfa DH 3-100 ?

As an authorized distributor, Hicotech provides genuine Kluberalfa DH 3-100 and various other industrial products including lubricating oils, greases, chemicals, and more. We offer consultation services and competitive pricing. Please don't hesitate to contact us for further information.

In addition, we also distribute other product categories such as:

Contact Information:

Hotline/Zalo. 094 526 1931

Website. Hicotech.com.vn

Email: Sale@hicotech.com.vn

Xem thêm